> For the complete documentation index, see [llms.txt](https://ez-wifibroadcast.gitbook.io/project/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://ez-wifibroadcast.gitbook.io/project/getting-started/soldering-its-easy-really.md).

# Soldering (it's easy, really)

## Identify the pads on your Pi

Depending on which Pi you are using, you need to solder to different pads.

{% hint style="danger" %}
 Take your time determining where to solder. A mistake here might render you precious Pi useless!
{% endhint %}

Once you've established and marked the pads, layout the cable you are going to solder. Strip a small amount of protective covering and apply some solder to the exposed wire.